Fogarty's Home Services Before & After Photos

This homeowner originally called us hoping that we would be able to help him with insulating his new home. When we arrived at the home to go over his concerns and comfort level, he stated that he had an inadequate sump pump and did not know if we were able to take care of that. Of course, we told him YES, we do sump pumps! 

We helped this homeowner by installing one of our SuperSump™ sump pump systems. This system features a 1/3 hp cast iron pump which can discharge up to 2200 gallons per hour, 8 feet high. It even features a WaterWatch™ alarm system that will alert the homeowner if the pump were to fail. Now, this homeowner can rest easy knowing that their basement is adequately protected. 

This homeowner in Wilbraham, MA called us hoping that we would be able to replace their bulkhead door. It was several decades old, and desperately needed to be replaced. It was also rusting, and fairly unattractive. 

Luckily, Fogarty's Home Services was able to help this customer. We were able to install a beautiful new bulkhead door. We first had to pour concrete, ensuring that it had a solid base of support. After the concrete was hardened and ready for the next step, we installed the bulkhead door. We caulked around the edges and installed flashing behind the door to ensure a tight fit.  Now, they have a beautiful bulkhead door!

This homeowner in Wilbraham, MA called us while he was in the process of purchasing a home. They had tested the home for radon, and it came back to 4.5 pCi/L -- over the EPA's radon action level of 4 pCi/L. He was concerned about the health and safety of his family, and wanted to get it mitigated before they moved in.

We had the perfect solution for this customer! We installed a radon mitigation system in his home. We identified the specific space where the mitigation system should be installed. After that, we drilled a hole in the floor as well as a hole in the wall for the exterior penetration. We put together the pipes, starting in the floor, and built it out through the exterior penetration to the outside. We secured the pipes to the wall, and then installed the manometer onto the pipe. (A manometer measures the pressure of the radon gas in the system, indicating whether or not the system is functioning). We then went outside to continue building out the system. We installed the fan and continued building out the pipes, securing them to the outside of the home. Our technician then sealed around the holes that had been drilled for the system. Now, the homeowner has a brand new radon system for their new home! 

This homeowner in Wilbraham, MA called us after testing the home he was purchasing for radon. His radon level came back to be 4.5 pCi/L, which is higher than the EPA's radon action level of 4 pCi/L. He wanted to reduce his radon levels as much as possible for the health and safety of his family.

We were able to help this customer. We installed a radon mitigation system in his home. We identified a specific closet where the mitigation system would be best installed. We began by drilling the holes in the floor and the hole in the wall for the exterior penetration. We then began installing the pipes and secured them to the wall. The radon mitigation technician installed the manometer on the pipe on the inside of the home. The manometer measures the pressure of the radon in the system, indicating whether or not it is functioning correctly. After that, he went outside to build the rest of the system. He installed the fan on the outside of the home. He sealed around all of the holes that had been drilled for the system. Now, this homeowner has a radon mitigation system designed to keep their levels low! 

This homeowner in Wilbraham, MA after accidentally shutting off her radon fan. She accidentally flipped the switch connected to the fan, and it stopped and would not turn back on. Our radon specialist came out to the home to identify what was going on with her fan, and what she would need. Her fan was broken, and it was unable to be fixed.

We were able to help this customer! We replaced her old, broken fan with a brand new one. We utilize many different radon fans, depending on the specifics of the home. After identifying the perfect fan, we removed the old one. We then installed the new one in its place. We also replaced the manometer on the inside of the home and labeled the radon pipe appropriately. We finally tested the system to ensure it was functioning. Now, the homeowner is very happy!