Mold Removal Before & After Photos

This homeowner had an energy audit done and the company doing the audit refused to go further upon discovery of a rather invasive mold situation. The homeowner was desperate to get to the root of the problem and get it remedied immediately. The homeowner came across our ad in a local publication and gave us a call.

The solution to fixing the problems in this home was quite a process. This home has 3 crawlspace areas that all needed to be extensively treated with MoldX2™ Cleaner and Botanical to get rid of existing mold and help to prevent future mold from growing. Each Crawlspace needed to have our Crawlspace Encapsulation System installed with Drainage Matting, TerraBlock™ Floor Insulation and SilverGlo™ Insulation on the walls. In addition, we used ZypFoam™ Closed-Cell Spray Foam Insulation around the Rim Joists in the basement and crawlspaces to properly air seal and help keep moisture out. We Installed a SmartPump™ and SmartPipe™ System in the crawlspace under the living room to eliminate water. We also installed a SaniDry™ High Performance Basement Dehumidification System in Main basement area. After removing old and replacing attic insulation with TruSoft™ Cellulose , TiteShell™ Can Light Covers and air sealing in attic, this job is a Wrap!

Mold in your attic is not normal, not healthy, and a sign that the humidity in your attic is above 75%. Fogarty's Home Services used Mold-X to neutralize and prevent the mold from producing any further spores.  

This homeowner was referred to us by an existing customer who recently had work done and knew we were perfect for the job. The homeowner had a terrible problem with mold in her attic and asked us to send someone out to help.

Our Building Science Specialist was able to easily identify the problem as being a poorly vented out bath fan leading to the attic. The air coming from the bathroom was mostly warm air, hitting the cold air in the attic and condensing into water and resulting in mold. We completely removed all existing, moldy fiberglass insulation and then cleaned and prepped the area for treatment with our MoldX2™ Cleaner and Botanical. We then built a deck and dam and blew in  new TruSoft™ Cellulose insulation. Next we ducted the bath fan out through the gable end and outside, preventing future mold issues. We completed the job by installing a David Lewis™ attic pull-down stair hatch cover to air seal and insulate the entrance to the attic.

This homeowner in East Windsor, CT had issues with mold in her home but was not sure where it was coming from.

She had old, messy insulation that we removed. We then treat the attic for mold with our Mold-X2. To make sure that the problem does not persist, we ensure that the attic can vent out moisture while also sealing off any air leaks to the home below. Lastly we blow in our cellulose.

Thanks to Dr. Energy Saver by Eco Energy Solutions, the home is mold free AND more energy efficient!

This homeowner in Longmeadow, MA called us saying that her basement had water in it, as well as mold and musty odors. She had a sump pump, but it was not working effectively.

In order to help this customer, we first had to remove the ineffective sump pump and the pipes that were attached to it. We then set to work replacing it. We replaced it with our TripleSafe™ sump pump. This sump pump features three pumps! The first pump is a 1/3 hp, cast iron Zoeller pump that can pump up to 2200 gallons per hour, 8 feet high. Should the first pump fail or not be able to keep up with the temporary heavy flow of water, a 1/2 hp AC back-up pump on a separate discharge line can pump 3900 gallons of water per hour. If the power fails, then a third, battery operated "UltraSump" pump automatically pumps up to 12,000 gallons of water out of the basement.

Now, this homeowner will have peace of mind that she has three pumps keeping her basement dry!