Click on a photo to enlarge.
This homeowner in Chicopee, MA called us hoping to get more insulation due to his high energy costs. He also had family members living in the basement that he suspected was poorly insulated. When our Home Comfort Specialist arrived at the home, she noticed that the basement had no insulation in it. This explains the fact that the floors upstairs would be very warm or very cold, depending on the season.
We were able to help this customer out by insulating his basement. We specifically insulated the rim joist. That is the perimeter of the floor framing system along the exterior of the house. We sprayed this rim joist with two-part expanding spray foam. This seals all air leaks in the rim joist from the outside and insulates this area of the home. It seals all of the cracks, gaps, and joints where air from the outside was entering the home.
Now, this home will be temperature controlled and safe for years to come!
This homeowner in Chicopee, MA called us stating that he wanted his attic properly insulated. He said he had very little attic insulation, and he needed more.
We had the perfect solution for this customer. We were able to replace the attic insulation with TruSoft™ cellulose insulation. We started by removing the loose fiberglass insulation with a large vacuum. We then went in and air-sealed around all of the points where air leaks up from the home to the attic. We did this using our Zypfoam™ spray foam. Once the attic was air sealed, we used a long hose to blow in TruSoft™ cellulose insulation. TruSoft™ is amazing -- it does not burn, get moldy, or attract pests. The blown-in insulation fills all gaps and oddly shaped voids. The homeowner is now much more comfortable in his home!
This homeowner in South Hadley, MA had called and complained about having cold floors. One of the things we always look out for is the rim joist in the basement. In this case, like most other homes, the rim joist was not insulated. It was letting in cold and dry air in in the winter and hot humid air in in the summer.
To fix this problem we have to First remove any old fiberglass batting. Then we spray our 2 part expanding spray foam to seal up all gaps and penetrations. Now we have stop the convection and conduction loss that was causing this homeowner problems.
Thanks to Dr. Energy Saver by Eco Energy Solutions, this home will be far more comfortable!
This homeowner in South Hadley, MA called us out to their home to remove and replace their old insulation. This home had very old, fiberglass insulation in their attic. Fiberglass insulation is very fluffy and allows air to easily seep through, and exit or enter the home.The attic is always the first priority in regards to insulation.
First we needed to remove all of the old, nasty fiberglass insulation. We remove, bag up, and properly dispose of the old insulation. We do our air sealing before we install new insulation. This is because without air sealing you are not properly sealing the home up. We air seal all of the top plates with one-part fire retardant foam. Now we can insulate! We blow in our TruSoft cellulose insulation, this fills all of the gaps, cracks, and odd shaped voids in the attic.
This will result in a more comfortable, and energy efficient home, thanks to Dr. Energy Saver by Eco Energy Solutions!
This homeowner in South Hadley, MA contacted us about having old insulation in the attic which needed to be replaced. As you can see, the previous insulation only barely made it up as high as the joist, which on average is 8 to 10 inches, only half of what is required for a home!
We removed this insulation and sealed any air leaks that were present to ensure that none of the air this homeowner pays to heat will escape through the top of the house. We the installed 20 full inches of our TruSoft cellulose insulation. We also created a catwalk to make it safe and easy to reach heating and cooling equipment that resides in the attic.
Thanks to Dr. Energy Saver this homeowner can live more comfortably and enjoy having lower energy costs!
