Insulation Services Before & After Photos

This homeowner in Northampton, MA needed his insulation removed and mold remediated. 

We were able to help this customer. In order to remove the insulation, we had to first bag all large pieces of fiberglass batt insulation. Then, we had to use a vacuum in order to remove the loose fill insulation. 

Now, this home is ready for the next steps -- air sealing and installing new insulation! 

These homeowners in Northampton, MA wanted to make their home more energy efficient as well as eliminate moisture coming up from their dirt crawlspace.

Our first step with crawlspaces is to make sure that outside air and temperatures can't get in. We sealed the rim joist and any vents letting in drafts as well as installing our SilverGlo graphite infused EPS foam board with a radiant barrier facing to make sure the cold cannot get in through the walls. We then seal off the floor, starting with a dimpled matting to create air space and a thermal break. Then we put down our TerraBlock floor insulation, and seal the floor off with a vapor barrier liner.

Thanks to Dr. Energy Saver by Eco Energy Solutions, these homeowners will be paying less to keep their home comfortable and will not have to worry about moisture getting in!

Basement windows inserts were installed and sealed air tight. 

This homeowner in Windsor Locks, CT had just purchased their home and knew there was work to be done with the insulation. Cape Cod style homes often have poorly insulated kneewall spaces, and we can help.

The old insulation was dirty, ineffective, and falling apart so we started by removing it. Once the space was clean, we installed our SilverGlo graphite infused EPS foam with radiant barrier to keep the heat from the roof out and the heat from the home in. Lastly, we sealed the spaces between the boards.

Thanks to Dr. Energy Saver by Eco Energy Solutions, this home is far more energy efficient and comfortable.

This Homeowner in Windsor Locks, CT was putting away storage during the holidays and realized that the attic was not properly insulated. They were running ducts through the attic which is vented. The ducts were being exposed to extreme temperatures making it tougher to heat and cool the home. They also had a mold issue, which can be very dangerous!

The old, fiberglass insulation in their attic was ineffective and needed to be removed completely. We removed the insulation and the attic was vacuumed. Then, we spray our Mold-X2 to to kill and stop all mold spores from growing! Now, we had a clean work space, to start installing the foam insulation board. We got to work installing our SilverGlo graphite infused foam insulation board, across the roof rafter and Gable end. The foil on the foam board reflects heat out in summer, and keeps the warm air in during winter. The roof is still vented, and stays cold in winter to prevent ice damming. Now the attic is a conditioned space, and the ducts don't have to work so hard because the environment is at a maintained temperature. Thanks to Dr. Energy Saver by Eco Energy Solutions, these homeowners will have a more comfortable home, lower energy bills and a storage space in the attic!