Basement Waterproofing Before & After Photos

This family in Williamstown, MA reached out to us looking for help with basement waterproofing. They had recently had water intrusion in their basement due to late winter's melting snow and heavy rains. When our Home Comfort Specialist came out to the home, he noted that the basement had standing water in multiple rooms. 

In order to help this customer, we needed to install a sump pump and perimeter drainage system. We used our TripleSafe™ sump pump alongside our WaterGuard™ perimeter drainage system. This sump pump features three pumps! The first pump is a 1/3 hp, cast iron Zoeller pump that can pump up to 2200 gallons per hour, 8 feet high. Should the first pump fail or not be able to keep up with the temporary heavy flow of water, a 1/2 hp AC back-up pump on a separate discharge line can pump 3900 gallons of water per hour. If the power fails, then a third, battery operated "UltraSump" pump automatically pumps up to 12,000 gallons of water out of the basement. Now, the homeowners will have peace of mind, knowing that they have three pumps keeping their basement dry! 

This family in Williamstown, MA reached out to us with a basement water issue. When our Home Comfort Specialist came out to the home, he noted that there was a dehumidifier in the basement. They wanted to address a pre-existing humidity issue alongside waterproofing the basement. High humidity in a home is caused by a number of important conditions. High humidity causes many problems in a home such as mold (which grows at Relative Humidities [RH] above 75%), rot (which happens above 90% RH) odors, airborne mold spores that aggravate allergies and asthma, increased pests and insects such as termites, and higher air conditioning and heating costs. Result - cold floors above, condensation, mold, rot, odors, drafty, uncomfortable home, higher fuel and electric bills.

We had the perfect solution for this customer. The SaniDry™ Sedona air system is a powerful but energy efficient dehumidification and air filtration system in one unit. Able to remove an incredible 100 pints of water per day and using only 5.9 amps of electricity, the SaniDry™ Sedona drains automatically to a sump or the outside with a condensate pump. It has a powerful 310 cfm blower to circulate the dry air completely around to dry building materials and contents. Mold doesn’t have a chance! An automatic control is easy - set it to 55% RH and forget it - the SaniDry™ Sedona does the rest! And there’s no buckets to empty! Results - Low Relative Humidity, mold stops growing, odors are reduced, lower air conditioning cost, upstairs is dryer.

This homeowner in Chicopee, MA reached out to us looking for help with her sump pump. She said that it was working, however, she did not think it was installed right. It also did not keep up when she had a flood in her basement a few months prior. 

In order to help this customer, we needed to remove her old sump pump. We then installed our TripleSafe™ sump pump in the same spot. This sump pump features three pumps! The first pump is a 1/3 hp, cast iron Zoeller pump that can pump up to 2200 gallons per hour, 8 feet high. Should the first pump fail or not be able to keep up with the temporary heavy flow of water, a 1/2 hp AC back-up pump on a separate discharge line can pump 3900 gallons of water per hour. If the power fails, then a third, battery operated "UltraSump" pump automatically pumps up to 12,000 gallons of water out of the basement. Now, the homeowner will have peace of mind, knowing that she has three pumps keeping her basement dry! 

This homeowner in Enfield, CT reached out to us looking for help with his sump pump. He wanted a new one with a lid and a backup battery. He was not having active water issues, he just wanted to make sure that his basement was protected before the spring rains hit.

We had the perfect solution for this customer. We installed a SuperSump® sump pump system into the basement. It features a sturdy liner, airtight lid, 1/3 hp cast iron pump which can discharge up to 2200 gallons per hour, 8 feet high, and a stand to keep the pump out of silt and sediment. A WaterWatch® Alarm System alerts the homeowner to pump failure before the basement floor gets wet. We also installed a perimeter drainage system that connects to the pump. The homeowner is very excited to have a new sump pump for his home! 

This homeowner in Enfield, CT reached out to us after his basement flooded. He had never had this happen before. He said that previously, there had only been minor seepage in the basement. He was concerned and did not want this to happen again.

We had the perfect solution for this customer. We installed a SuperSump® sump pump system into the basement. It features a sturdy liner, airtight lid, 1/3 hp cast iron pump which can discharge up to 2200 gallons per hour, 8 feet high, and a stand to keep the pump out of silt and sediment. A WaterWatch® Alarm System alerts the homeowner to pump failure before the basement floor gets wet. We also installed a perimeter drainage system that connects to the pump. The homeowner is very excited to have a new waterproofing system for his home!