Fogarty's Home Services Before & After Photos

This homeowner in Windsor, CT called us hoping that we would be able to help him with his home. He had his home's radon levels tested, and it was testing between 2.48 - 3.12 pCi/L. While this is not over the EPA's recommended Radon Action Level of 4 pCi/L, he still was very concerned about his radon level. He stated that he wanted it "as low as possible", in order to make his home safer and more healthy for his family. 

We were able to help this customer. We installed a passive radon mitigation system in his home. We began with finding the ideal spot for the mitigation system. After that, we drilled holes -- one in the concrete slab in the basement and one where the pipe will penetrate to the outside. We then installed the pipe, followed by a manometer. The manometer measures the pressure of the radon gas in the mitigation system, indicating whether or not it is functioning correctly. We then installed the fan on the outside of the home. After that, we sealed the cracks, gaps, and holes in the basement. We tested the system before we left to ensure that it was functioning. Now, this homeowner has a brand new mitigation system to keep his levels as low as possible! 

This homeowner in Windsor, CT came into our office to discuss her attic insulation. She wanted to get her insulation replaced, as she had very inadequate fiberglass insulation. She had high energy bills -- almost $1,000 a month -- and was hoping that insulation replacement could be the solution to her problem. 

We were able to help this customer! We were able to replace the attic insulation with TruSoft™ cellulose insulation. We started by removing the old blown-in insulation using a large vacuum. We then went in and air-sealed around all of the points where air leaks up from the home to the attic. We did this using our Zypfoam™ spray foam. Once the atitc is air sealed, we used a long hose to blow in TruSoft™ cellulose insulation. TruSoft™ is amazing -- it does not burn, get moldy, or attract pests. The blown-in insulation fills all gaps and oddly shaped voids. The homeowner now can enjoy lower energy bills and brand new insulation!  

This homeowner called us originally to talk about a crack he had in his foundation that was letting water in. It had been in his home since he purchased it 26 years ago, but he was finally ready to fix it. When our Home Comfort Specialist came out to the home, he sat the homeowners down to talk about their home comfort issues. They stated that in addition to the crack, they wanted to reduce their humidity and mold in the basement, and they wanted to see if insulating it would fix the issue. 

We had the perfect solution for this customer! We utilized two-part expanding spray foam. We insulated the rim joist (the perimeter of the floor framing system along the exterior of the home). We spray this foam in the rim joist and over the sill plate. Insulating the rim joist in this way seals all air leaks -- filling in the cracks and gaps that are present there. This prevents outside air from getting into the home. The homeowner is now very happy, and he is much more comfortable in his home! 

Homeowner was referred to us by a prior client! He was experiencing issues with allergens in the basement including mold, dampness, and dust. This was a 1900's foundation wicking moisture into the home. Our Dr Energy Saver solution included the implementation of a Clean Space Encapsulation.

This homeowner in Northampton, MA needed his insulation removed and mold remediated. 

We were able to help this customer. In order to remove the insulation, we had to first bag all large pieces of fiberglass batt insulation. Then, we had to use a vacuum in order to remove the loose fill insulation. 

Now, this home is ready for the next steps -- air sealing and installing new insulation!