Fogarty's Home Services Before & After Photos

This homeowner in Shrewsbury, MA called us hoping that we would be able to help him with his home. He wanted to talk about getting his attic insulated and air sealed. He was in the process of replacing his air system with a heat pump. He was looking to replace his attic insulation at around the same time, especially as he had a tight work schedule. He was looking forward to making his home more energy efficient.

We were able to help this customer! We were able to replace the attic insulation with TruSoft™ cellulose insulation. We started by removing the old blown-in insulation using a large vacuum. We then went in and air-sealed around all of the points where air leaks up from the home to the attic. We did this using our Zypfoam™ spray foam. Once the attic was air sealed, we used a long hose to blow in TruSoft™ cellulose insulation. TruSoft™ is amazing -- it does not burn, get moldy, or attract pests. The blown-in insulation fills all gaps and oddly shaped voids. The homeowner now can enjoy a more energy efficient home! 

This homeowner in Grafton, MA reached out to us initially because he had found that there was black mold growing on his basement walls. There was mold in the fiberglass insulation on the walls as well as growing on the wood framing around the insulation. This was a new problem for him -- he had been in the home for 4 years without an issue. Since he had a family, he needed to keep the home insulated, but remove the possibility of mold growing back. 

We were able to help this customer. We utilized our Foamax polyisocyanurate board alongside two-part spray foam to insulate the basement. Before we were able to utilize these, however, we had to remove the mold and the old insulation. Once the mold was removed, we were able to go in and begin to insulate. The Foamax polyiso board was able to fasten directly over the existing walls. Now, this homeowner is happy to have his home back to normal! 

This homeowner in Southborough, MA called us hoping to get her radon fan evaluated. The fan was making a lot of noise and she wanted to get it fixed. However, the company that had installed it almost 15 years prior had closed, and she did not know what to do. Our radon specialist came out to her home to see what was going on. He found that the fan needed to be replaced, as it could not be fixed. 

We were able to help this customer. We utilize many different radon fans depending on many different factors. We chose the perfect fan for her home. We removed the old fan and replaced it with the brand new one. We also replaced the manometer. We then were able to test the system to ensure that it was functioning. It was much more quiet, and the homeowner was very happy! 

This homeowner in Southborough, MA called us hoping to talk about her radon fan. It was making a lot of noise, and she believed it needed to be fixed. Our radon specialist came out to the home to identify what was going on with her fan, and what she would need. Her fan was unable to be fixed, and it needed to be replaced.

We were able to help this customer! We replaced her old, broken fan with a brand new one. We utilize many different radon fans, depending on the specifics of the home. After identifying the perfect fan, we removed the old one. We then installed the new one in its place. We also replaced the manometer on the inside of the home and labeled the radon pipe appropriately. We finally tested the system to ensure it was functioning. Now, the homeowner is very happy!