Installing a Radon Mitigation System in Southington, CT

This homeowner in Southington, CT called us stating that his home's radon level came out to 9 pCi/L. This is higher than the EPA's radon action level of 4 pCi/L, which concerned him quite a lot. He wanted to install a mitigation system in order to lower his levels as soon as possible. Our radon measurement specialist came out to the home and identified the best spot for the mitigation system.

We were able to help this customer. We installed a radon mitigation system in his home. We began by drilling the holes in the basement -- both in the concrete slab in the bottom and the hole for the exterior penetration. He then began installing the pipes and secured them inside the basement. He installed the manometer on the pipe on the inside of the home. The manometer measures the pressure of the radon in the system, indicating whether or not it is functioning correctly. After that, he went outside to build the rest of the system. He installed the fan on the outside of the home. Once the system was installed, he went back inside, sealing around all of the cracks and gaps in the basement. He also sealed all of the holes that had been drilled for the system. Now, this homeowner has a system designed to keep the radon levels in his home low!