Removal of Old Sagging Insulation from Crawl Space in Westfield, MA

The old thinking in crawl space construction was to vent the crawl space and create the thermal boundary (insulation layer) at the crawl space ceiling. It doesn’t work. Insulation is pulled by gravity away from the sub floor you’re supposed to be insulating. The same cold air under the insulation flows into the space on top of it - rendering the insulation useless. As the insulation gets heavier with moisture content, it falls away from the sub floor even more and can even fall to the floor. Fiberglass batt insulation has paper facing and organic material in the resin used to set the fibers into a batt - both are mold food. Results - mold, smelly insulation that is not providing any insulation value and has sagged or even fallen.

Dr. Energy Saver® will remove existing fiberglass batts from your crawl space. It’s not fun laying on your back in a tight (dirt) crawl space. Insulation has hostile fibers when it’s disturbed. The insulation is very bulky and takes up a tremendous amount of space in trucks and our dumpsters which must be emptied. But it’s necessary to have a healthy home in the end. Result - now your crawl space is ready to be fixed properly with other Dr. Energy Saver solutions. The thermal boundary will likely be moved to the crawl space walls and vents eliminated. No more nasty fiberglass