Reliable Insulation & Radon Testing Company in Woodstock Valley, CT

Attic insulation in your home can get pretty nasty. Over many years it sits there collecting dirt, dust, pollen, bugs, rodent feces (from mice, squirrels, bats, etc.), bird droppings and nests and all kinds of undesirable things. It’s possible that old insulation like this can be moved aside for a proper air sealing job that must be done prior to adding enough TruSoft™ blown cellulose insulation to today’s standards - but why not remove the old, nasty insulation from your home and start fresh?

Dr. Energy Saver will conduct the unpleasant task of removing the damaged, soiled insulation in your attic. Batt insulation is bagged and then the attic is vacuumed to remove pieces, parts and dust. Loose fill insulation is vacuumed with a giant vacuum located outside with giant filter bags and a very long, fat hose. The result, Now your attic is clean! It’s ready for proper air sealing and installation of clean, new, fresh TruSoft™ cellulose insulation or one of our other Dr. Energy Saver strategies to make your home comfortable and energy efficient.

Many older homes have no insulation in the exterior walls. This causes obvious problems. Heat flows from more (inside) to less (outside in winter) right through the walls, and the opposite in summer. Nearly all walls leak air, insulated or not, causing drafts. The cold wall surface cools interior air which then sinks and travels across the floor and up the warmer interior wall, and across the ceiling back to the exterior wall. This is called a "convective loop" and makes rooms feel even draftier. Results - cold, drafty rooms, uncomfortable home, heating and cooling systems run much more and need more service, difficult to keep house at comfortable temperature, higher fuel and electric bills, dry home in winter, more dust/pollen, more humidity in the house in summer when air conditioned. Siding is removed temporarily as necessary and 2 9/16" holes are drilled through the wall sheathing. A fill tube is inserted up (and down) into wall cavities to not only fill, but dense pack the wall cavities. Dense packing is a technique that packs the insulation in very tightly - so tightly that all irregular shaped cavities and crevices in the wall cavities are filled, and air will not penetrate the dense packed cellulose. It's remarkable, and something that can't be achieved with fiberglass - not even close! Dense packed cellulose stops air flow through the wall and insulates. TruSoft™ Cellulose is treated to be highly fire, most and pest resistant. Holes are plugged and siding is put back. With wood siding, old nail holes and new nails may be noticeable on close inspection. Very small new nail heads will be visible on aluminum siding. (If specified, siding will not be removed but drilled and plugged instead). Results - a less drafty, warmer, quieter, more comfortable house, less dust/pollen, house not so dry in winter, lower fuel/electric bills, heating system runs - less maintenance.