Trusted Radon Testing & Mitigation Company in Princeton, MA

This homeowner in Princeton, MA reached out to us stating that he had a mold issue in his attic. His attic was absolutely covered in mold -- it was extremely bad. A combination of a lack of ventilation and a high amount of humidity caused their attic mold to get out of control. He wanted to be able to remove it as soon as possible.

We had the perfect solution for this customer! In this solution, we utilize our Mold-X2 Cleaner and Botanical solutions. Mold-X2 Cleaner effectively eliminates mold and mildew stains on contact. It is non-abrasive and non-flammable, and is sprayed on effected areas. Once Mold-X2 Cleaner is applied, mold disappears instantly, leaving wood surfaces looking nearly new. Mold-X2 Botanical, a plant-based disinfectant with a pleasant, temporary scent, is sprayed or fogged on surfaces, which prevents mold from growing back. Now the attic is ready for other solutions. Result - Mold eliminated, no odors or wood rot.

This homeowner in Princeton, MA called us stating that he had bad mold in his attic. They had lived in the home for 40 years and it had gotten worse over the years. They wanted to get the mold removed. Our Home Comfort Specialist came out to the home and noted that their attic insulation was blown-in fiberglass. They did not have any air sealing, and they did not have proper ventilation. The humidity was very high in the attic. 

We had the perfect solution for this homeowner. Adding insulation in an attic without sealing all air leaks first should never be done, because it is just burying air leaks and making them impossible to seal later - and insulation DOES NOT STOP air leaks. That’s why, in this solution, we first carefully air seal the many various points where air from the home leaks up into the attic and is lost. Our premium TruSoft™ cellulose insulation is blown to the optimum R-value (typically R60). TruSoft™ will not burn, get moldy, or attract pests. Blown insulation fills all gaps and odd shaped voids, and by filling over framing members, “thermal bridging” is avoided.

This homeowner in Princeton, MA reached out to us because she was concerned about her home's radon levels. She lived with her parents, who were aging. She wanted to be able to rest assured that her radon level was not high. She stated that the home had a mold issue and had poor ventilation that she wanted someone to evaluate. 

We had the perfect solution for this customer. We tested the home's radon levels using our AirThings Corentium Pro radon monitor. This test was set up in her basement. Our certified radon measurement specialist came out a few days later to pick up the test. Upon receiving the test, he began to interpret the results. He found that the home had lower radon levels -- it tested to be 2.1 pCi/L on average. Now, the homeowner is able to make an informed decision about their home!