Victor brings a background in Insulation Installation to the table at Dr Energy Saver by Eco Energy Solutions. Victor began with us as a Production Installer and is now a valuable Foreman. Victor is well versed in product knowledge and installation techniques that make him a key team member! He has experience in inventory and organization as well. Victor is always in a cheerful mood, and happy to help homeowners everyday.
This homeowner called us because she was experiencing a lot of trouble with ice damming and overall energy efficiency. This particular homeowner happened to be friends with a previous customer of ours and was referred to us when she was discussing her issues with them. Unfortunately, Ice damming is a far too common concern for many New Englander's facing our unpredictable, often brutal weather patterns.
Our Building Science Specialist was able to quickly determine that the most effective way to handle this situation was to convert the existing, inefficiently insulated, vented attic space to an energy efficient SuperAttic™. First we removed all existing old and moldy batt insulation and treated the area with our MoldX2 Cleaner™ and MoldX2 Botanical™. The area was then ready for us to install our SuperAttic™ Advanced Conversion system with SilverGlo™ EPS panels across the roof rafter and gable end to create a conditioned area.
This home is now more energy efficient, resulting in lower energy bills, regulated airflow, and even added conditioned space in the attic that is ready for finishing! No more ice dams!
This homeowner in Manchester, CT called in looking to insulate her attic, her home was not energy efficient and she was happy to be able to finally address it. The air that she was paying to heat and cool was escaping through her improperly air sealed attic.
We first removed the old insulation and debris (including a deceased bat!) from the attic. With the space cleaned up, we air sealed each and every space where air could leak from the home up into the attic. Lastly, we insulated with our blown in TruSoft cellulose.
With the help of Dr. Energy Saver by Eco Energy Solutions, this homeowner is now saving money and staying comfortable in her home.
This homeowner called because her 1949, Cape Style home, had been causing heat system concerns since she bought it in 2019. When the outside temperature changed, so did the inside. The homeowner had received 2 prior energy evaluations and even had some attic work done before she called us.
Our Building Science Specialists were able to identify that the drafty and unfomfortable Master Bath along with the problematic mudroom were actually caused, in large part, to the highly inefficient crawlspace below the home which had been a vented, dirt crawlspace. Dr. Energy Saver was able to the solve the problem by installing an Encapsulation System with Drainage Matting, Terra Block Floor Insulation, SilverGlo Insulation on the walls and an anti-microbial 20 mil liner, resulting in lower humidity, warmer floors, less drafts and a more comfortable house with lower fuel and electric bills.
This Homeowner in Windsor Locks, CT was putting away storage during the holidays and realized that the attic was not properly insulated. They were running ducts through the attic which is vented. The ducts were being exposed to extreme temperatures making it tougher to heat and cool the home. They also had a mold issue, which can be very dangerous!
The old, fiberglass insulation in their attic was ineffective and needed to be removed completely. We removed the insulation and the attic was vacuumed. Then, we spray our Mold-X2 to to kill and stop all mold spores from growing! Now, we had a clean work space, to start installing the foam insulation board. We got to work installing our SilverGlo graphite infused foam insulation board, across the roof rafter and Gable end. The foil on the foam board reflects heat out in summer, and keeps the warm air in during winter. The roof is still vented, and stays cold in winter to prevent ice damming. Now the attic is a conditioned space, and the ducts don't have to work so hard because the environment is at a maintained temperature. Thanks to Dr. Energy Saver by Eco Energy Solutions, these homeowners will have a more comfortable home, lower energy bills and a storage space in the attic!
This Homeowner Called us out to her home to update their attic insulation. They were experiencing ice damming on the roof. Some spots were too hot and others were too cold. This home was insulated with old fiberglass insulation.
We removed the old inefficient fiberglass insulation in the attic. We install our blocks of Silverglo foam insulation board between the ceiling joist bays, and under the rafters. We air seal around the blocks with foam. Air is no longer able to enter and escape out of the home.
Thanks to Dr. Energy Saver by Eco Energy Solutions this home is more comfortable, energy- efficient, and no longer has snow melt!
This Homeowner called us out to their home to take a look at their attic. They had the old insulation removed and now needed new insulation installed. Our Building Science Specialist arrived and evaluated the attic and gave them the best options for insulating and air sealing their attic.
When the installers arrived they cleaned and vaccuumed the attic to remove all dust and debris from the previously installed old inefficent insulation. Next they air sealed the many various points where air from your home leaks up into your attic and is lost. Then We Installed our Blown-in premium TruSoft cellulose insulation, which fills all gaps and odd shaped voids.
Thanks to Dr. Energy Saver this homeowner will now have lower fuel and electric bills. a more comfortable, less drafty home.
This homeowner had an energy audit done and the company doing the audit refused to go further upon discovery of a rather invasive mold situation. The homeowner was desperate to get to the root of the problem and get it remedied immediately. The homeowner came across our ad in a local publication and gave us a call.
The solution to fixing the problems in this home was quite a process. This home has 3 crawlspace areas that all needed to be extensively treated with MoldX2™ Cleaner and Botanical to get rid of existing mold and help to prevent future mold from growing. Each Crawlspace needed to have our Crawlspace Encapsulation System installed with Drainage Matting, TerraBlock™ Floor Insulation and SilverGlo™ Insulation on the walls. In addition, we used ZypFoam™ Closed-Cell Spray Foam Insulation around the Rim Joists in the basement and crawlspaces to properly air seal and help keep moisture out. We Installed a SmartPump™ and SmartPipe™ System in the crawlspace under the living room to eliminate water. We also installed a SaniDry™ High Performance Basement Dehumidification System in Main basement area. After removing old and replacing attic insulation with TruSoft™ Cellulose , TiteShell™ Can Light Covers and air sealing in attic, this job is a Wrap!